---

Development and optimization of mouth-dissolving strips of L-methyl folate: A modern approach for patient compliance

Full Text PDF Share on Facebook Share on Twitter

---

Original Article

Author Details : Umang Varia, Varundev Gol, Bhupendra Prajapati*

Volume : 8, Issue : 3, Year : 2023

Article Page : 171-183

https://doi.org/10.18231/j.ijcaap.2023.029

Suggest article by email

Get Permission

Abstract

Background: The goal of this study is to create a mouth-melting strip of L-methyl folate calcium, which will dissolve and disintegrate more quickly when given orally for the onset of action.
Materials and Methods : Solvent casting was used to create a calcium L-methyl folate film that dissolves in the mouth. Polymer, plasticizer, and flavouring agents were chosen after early experiments. Once the excipients were chosen, 3 complete factorial designs were used to improve the formulation. Folding endurance (Y1), tensile strength (Y2), and disintegration time (Y3) were chosen as dependent variables, whereas HPMC E5 concentration (X1) and glycerine concentration (X2) were chosen as independent variables. The film's physicochemical parameters, including SEM, thickness, percent elongation, percent cumulative drug release, and palatability, were measured for the optimized batch and compared to those of the commercial product.
Results: The formulation of the mouth-dissolving strip took into account outcomes from the trial batch, including transparency, stickiness, and brittleness. The optimal batch has 55% HPMC E5 and 14.9% glycerine, with a folding endurance of 59±0.23, a tensile strength of 4.18±0.07 N/m, and a disintegration time of 40±0.12 seconds. The optimized film has dimensions of 0.08±0.01 mm in thickness, 60±1.58 mg in mass, 15.33±0.25% in elongation, and 98.33±0.27% in content uniformity. The SEM results validate the uniform film with uniform drug distribution. After 3 minutes, the L-methyl folate calcium mouth-dissolving strip had a ?R of 99.42%. Findings of f2=52.85 and f1=12.5 for the similarity factor suggest that the medication release is clinically and commercially equivalent. One month of stability at 30°C and 65%RH was observed for the improved batch.
Conclusion: The results of the created mouth-dissolving strip test are satisfactory, indicating the intended medication release. When compared to pills that dissolve in the mouth, it is clear that it is more patient-friendly.
 

Keywords: L-methylfolate calcium, Solvent casting method, SEM, Optimization, The similarity factor

How to cite : Varia U, Gol V, Prajapati B, Development and optimization of mouth-dissolving strips of L-methyl folate: A modern approach for patient compliance. IP Int J Compr Adv Pharmacol 2023;8(3):171-183

This is an Open Access (OA) journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 License, which allows others to remix, tweak, and build upon the work non-commercially, as long as appropriate credit is given and the new creations are licensed under the identical terms.